An erroneous device update, a new GPU, degraded system files, a new USB device- any of these reasons are responsible to cause the Windows 10 automatic repair loop issue. In usual conditions, you would encounter this fault when your Windows 10 device attempts to start and cannot do so thereby compelling itself through a limitless cycle of trying to sort out the issues. In other words, if Windows cannot repair it, it usually restarts and repeats the process.
The automatic repair process fails to work and you get an error message- automatic repair couldn’t repair your PC. In case you don’t know, bootable installation media or the recovery drive can assist with the fixing of automatic repair. So with these things in mind, let’s find out more about the Windows 10 automatic repair loop and its possible fixes.
What are the Reasons behind the Windows 10 Automatic Repair Loop?
To be precise, one cannot cite a single reason for the Windows 10 automatic repair loop. In other words, this problem arises because of the presence of various situations. For instance, lost or degraded device files are mainly responsible for the recurrence of this problematic issue.
The essential files which it requires are rendered unavailable because of this situation. What’s more, this also stops the Kernel of the Windows and other indispensable services of the Windows from loading properly. In simple words, this would prevent you from accessing your device. Another reason behind the Windows 10 automatic repair loop issue is the presence of the recently fitted module or peripheral which has a missing device driver.
Also, there were situations where users who have recently updated their PC faced this problem. This is because the new components usually require drivers of the device to permit Windows to utilize it. And if the drivers are misplaced or outdated, it can give rise to the nagging issue of repair loop.
Other issues like, defective modules, virus infection or broken setup files can be the main reasons behind the automatic repair loop issue. But the below-mentioned methods to solve the Windows 10 automatic repair loop problem would surely work.
How to solve the Windows 10 Stuck in Automatic Repair Loop?
Well, the automatic repair loop in Windows 10 issue is quite problematic and can severely disrupt your daily operations in the device. If you are facing the issue of late, here are some methods which would help you to solve this issue.
Method 1- Detach or Remove Devices that have been Installed Recently
If you have lately connected new hardware components before the appearance of the Windows 10 automatic repair loop problem, then be aware that there are faults associated with the hardware system. This can be because of the mislaid driver or the conflict with the driver. You should always remember that it is essential to install device drivers as they result in the smooth running of the hardware components.
For instance, Windows will interface your device’s GPU with software and other Windows services. If there are no drivers or faulty driver software, it can prevent Windows to start in a proper manner. In a majority of cases, detaching the problematical device would permit Windows to start properly.
If your Windows starts with the component eliminated from your laptop or PC, you can opt for connecting fresh drivers or substituting the hardware component. For instance, when you are mounting a new GPU, you have to install drivers from the website of the manufacturer.
Method 2- Opt for System Repair Tools
If you aren’t able to instantly ascertain the reason of the Windows 10 automatic repair loop, you can opt for the repair tools present in your Windows 10 device. Well, it is quite common that Windows wouldn’t be able to boot. That’s why you have to power Windows to start with the command prompt screen by taking help of the advanced options window.
- You have to resume your device and press F8 key before the logo of the Windows and the spinning icon begins to flash on the screen. Note that you have to reiterate this step to navigate to the advanced options screen. This would also make the Windows boot troubleshoot option to pop up. You have to choose the advanced repair menu to start with the process.
- In the select the option menu, opt for the troubleshoot menu.
- In the troubleshoot menu, select the advanced options.
- You have to choose command prompt so that Windows can boot to its nominal version.
- When the window of command prompt appears, you have to input chkdsk /r c: to commence the checking process of the drives of your device with the disk utility tool. In case this step detects errors, the chkdsk would spontaneously restore them.
- In the next step, you have to check the reliability of the Windows system with the built-in file checker tool. This would usually be a time consuming process and so you should have patience.
- Once you are finished, close the window of command prompt and reboot your device.
Method 3- Restrict the Process of Automatic Startup Repair
If you are confident that the installation procedure of Windows 10 procedure is still working, you can inactivate process of automatic repair. This would permit your device to boot without the nagging issue of automatic repair. Note that this process is good only when the Windows is functioning appropriately. On the other hand, if the Windows is not working in a proper manner, you have to consider drastic fixes. Here are some steps which you need to follow to disable the automatic startup repair.
- To start, you have to make the troubleshoot option to appear. You can select the options related to advanced repair to start.
- In the boot troubleshoot menu, you should select troubleshoot, and then advanced options and then command prompt. It is important that you wait for the opening of the command line. Note that you also have to validate the Microsoft account.
- When the command line appears, you have to type bcdedit. The value of the identifier would seem as default. If you want to alter this, make sure that automatic startup repair doesn’t function. Also, if you are typing this command from the PowerShell option in the safe mode, it is imperative to substitute the value of the identifier to the current value.
- Close the command line and restart your PC. In case Windows is able to start, you would have the ability to sign in normally with the Windows 10 automatic repair loop being addressed completely.
Method 4- Run the Windows 10 DISM Tool
As mentioned in method 2, the system file checker utility tool would be able to solve the system files with the help of a local Windows image. If certain files are corrupted, Windows would replace them with the local image.
However, if there are issues associated with the image itself, Windows cannot help you. To address this problem, you can use DISM. DISM refers to Deployment Image Servicing and Management and would help in repairing your system files. Here are the steps you should follow.
- Press the F8 key during the boot up and then select the advanced repair options.
- In the menu pertaining to troubleshoot, you have to select troubleshoot, advanced options, startup settings and restart.
- At the next step, you have to select enable safe mode with networking by pressing the F5 key. Note that Windows would boot in safe mode with only a fewer services running.
- Once the Windows starts up in the safe mode, right-click the start menu and select the Windows PowerShell.
- In the PowerShell Window, type DISM/Online/Clean-up Image/Restore Health and allow the process to finish.
- When the DISM tool finishes running, you have to restart your PC and use the steps above to boot into the command-line window. You can repeat the SFC command to ensure that Windows is fully repaired.
Method 5- Use the Check Disc Utility Tool
To ensure that this method works, you have to attach the installation media of the Windows to your device. Moreover, it is important that you choose your preferred language. Here are some steps which you need to follow.
- Select repair the device option right from the bottom of the screen
- Select troubleshoot to make sure that the advanced options appear and then select the command prompt menu
- Input chkdsk and press the Enter key
- Reboot your device to check whether the problem still persists or not
Method 6- Rebuild BCD and Fix Boot with Command Prompt
Here are some steps with the help of which you can rebuild BCD and fix boot with the command prompt option.
- Choose command prompt by following the steps as mentioned in method 5
- Input exe/ rebuildbcd.
- Input the values in the form of exe/ fixmbr.
- Input exe/ fixboot.
- You have to input exit and press Enter after the completion of commands.
- You have to reboot your device. If you the same problem persist, try the next method.
Method 7- Reinstate Windows Registry
- Wait for the Boot options to appear and start Command Prompt
- In the command prompt menu, enter copy c: windowssystem32configRegBack* c: windowssystem32config and press Enter.
- If you are asked to overwrite the files, type all and press Enter.
- After exiting the command prompt, check whether the issue has been resolved or not.
Method 8- Perform Reset or Refresh
Here are some steps with the help of which you can perform reset or refresh.
- When the boot opens, choose troubleshooting.
- You have to select between reset or refresh options.
- Follow the instructions to complete the process.
Note that the reset option would delete all the installed files along with the apps and the settings.
1. What causes automatic repair loop in Windows 10?
The main cause is the existence of corrupted or damaged ISO files.
2. What happens when Windows 10 startup repair fails?
You have to use Windows 10 installation media to solve the boot error.
3. How do I boot into safe mode from BIOS?
You have to press F8 or Shift + F8 to boot into safe mode.
4. How to get out of the boot loop?
You have to boot Windows 10 in the safe mode and follow the fixes as mentioned above.
Well, as you can see, there exists a plethora of ways with the help of which you can solve Windows 10 automatic repair loop issue. Always ensure that you keep your Windows updated with the new driver updates to avoid this problem.